mechanical services

Mechanical Services

Complete MEP Mechanical Engineering & BIM Coordination Services

Introduction

AMC Engineer provides comprehensive mechanical, electrical, and plumbing (MEP) design services using Revit MEP, delivering fully coordinated LOD 300-400 models that reduce field conflicts by 85% and optimize HVAC system efficiency by 25% for hospitals, malls, and high-rise buildings.

What We Offer

VAV, chilled water, DX systems with load calculations, equipment selection, and energy modeling

Routing optimization, sizing calculations, and fabrication drawings with pressure loss analysis.

Domestic water, sanitary, storm water systems with fixture units and hydraulic calculations.

Navisworks clash detection and resolution between MEP/Structure/Architecture disciplines.

Airflow, thermal comfort, and smoke evacuation simulations for critical environments.

MEP system commissioning support and LEED energy modeling for green certifications.

Steps Of Work

1.Load Calculations & Sizing
Perform ASHRAE heat load, ventilation, and plumbing fixture calculations.
2.Conceptual Routing
Develop preliminary MEP routing with ceiling space allocation and shaft planning.
3.Detailed Design & Modeling
Create LOD 300 Revit MEP models with equipment, ductwork, and piping systems.
4.Clash Detection & Coordination
Run Navisworks tests, resolve conflicts, and issue coordinated model for approval.
5.Construction Documentation
Generate shop drawings, schedules, and specifications compliant with SMACNA/ASHRAE.
6.BIM Handover & As-Builts
Deliver COBie data, O&M manuals, and record models for facility management.

FAQs

What MEP codes do you follow?

ASHRAE 90.1, SMACNA, IPC/IPC, NFPA, SBC, and local authority requirements.

What Revit LOD do you provide for MEP?

LOD 200 (Schematic), LOD 300 (Coordination), LOD 400 (Fabrication-ready spools).

Do you perform energy modeling?

Yes, eQuest, EnergyPlus, and Revit Insight for LEED/Estidama compliance.

What is MEP coordination?

Automated clash detection ensuring no duct/pipe/structure conflicts before installation.