electrical services

Electrical Services

Complete Electrical Engineering & BIM Power Systems Design Services

Introduction

AMC Engineer delivers fully coordinated electrical BIM services using Revit MEP, providing LOD 300-400 models for power distribution, lighting, and low-voltage systems that reduce cable routing conflicts by 90% and optimize energy efficiency by 22% for commercial, industrial, and healthcare facilities.

What We Offer

Substation design, transformer sizing, MV cable routing, and protection coordination studies.

Panel schedules, feeder sizing, load calculations, and short circuit analysis per NEC/IEC.

Daylight harvesting, DALI/DMX controls, and photometric analysis with Dialux/Relux.

Fire alarm, CCTV, access control, data networks, and PA systems design.

Navisworks clash detection for cable trays, conduits, and equipment placement.

Solar PV design, EV charging stations, and microgrid integration with battery storage.

Steps Of Work

1.Load Analysis & Calculations
Perform demand load calculations, diversity factors, and voltage drop analysis.
2.Single Line Diagram Development
Create SLDs with equipment ratings, cable sizing, and protection device coordination.
3.3D BIM Modeling
Model cable trays, conduits, lighting fixtures, and panels in Revit MEP LOD 300.
4.MEP Coordination
Clash detection and resolution with HVAC/plumbing/structure disciplines.
5.Detailed Design Documentation
Panel schedules, riser diagrams, cable schedules, and control schematics.
6.Commissioning Support
Testing protocols, O&M manuals, and as-built model handover.

FAQs

What electrical codes do you follow?

NEC, IEC, NFPA 70, SBC 201, UAE Fire & Life Safety Code, and local regulations.

What BIM LOD do you provide for electrical?

LOD 200 (Routing), LOD 300 (Coordination), LOD 400 (Fabrication spools and terminations).

Do you design smart building systems?

Yes, BACnet, KNX, Modbus integration for BMS, lighting, and energy management.

What is cable tray coordination?

3D clash-free routing optimizing cable fill ratios and maintenance access.

Can you support arc flash studies?

Yes, ETAP/SKM PowerTools analysis with mitigation recommendations and labeling.